Binding Quilts with the Janome Quilt Binder Set

I love to free motion quilt my quilts, but once I get done quilting them, especially if I've gone a little over the top with ruler work and dense fills, I tend to stall out on the binding. So I finally got around to using the Janome Quilt Binder Set.

I am totally in love with the quilt binder set! It's perfect for just getting these quilts bound and done. And I'm a big fan of done over perfection any day.

People usually wonder, "What about the corners?" Well, I think my corners are possibly better than my usual traditional method. I've got a pictorial tutorial for you and I will hopefully follow up with a video at some point. (This is not the easiest process to get good video footage while still getting my hands where they need to be.)

Four fabulous corners and #2 is where I joined the beginning and end!

This is the Janome Quilt Binding Set, not to be confused with the simple binding foot, which can't handle the thickness of a quilt but does a great job with binding raw edges of garments or making thin straps. If you have something other than a Janome, check with your dealer as I would think some of the other brands would have a similar product.

It attaches to the machine, in part, by replacing the bobbin cover door with the base of the binder set, so it's important to get the right one for your machine. It's only meant for the bigger machines as you've got to have some room to work.

It does a half inch binding using a 2 inch strip of fabric. There are other binders that are compatible that do different sizes, but you need the base from this set to make them work with means another purchase, which can get spendy. So just stick with this one unless you've got your own sweat shop going.

I cut my strips 2 inches wide and join them with 45 degree seams, then press to one side. I've tried to press them open but the binder just pushes them to the right as it is fed through, so to one side they go. I also make sure to load it with the seam allowances going to the right.

 As you can see in the above picture, the attachment wraps the binding around the edges. That 90 degree positioning/fold of the binding really helps get the quilt fully into the binding. There are several adjustments that the various screws allow you to make, including angling it for a curved edge and making the bottom fold stick out further than the top fold of the binding.

It comes with a foot but I chose to use my narrow Acufeed Flex Foot (a built in walking foot that is perfectly synchronized to the regular feed dogs) for more even feeding of the quilt layers and binding. It works fabulously together.

You can use a straight stitch but using a decorative stitch ensures that you'll catch both edges of the binding for sure.  In these two samples, I used pretty wide stitches because they looked great with the quilts, but I have used a narrow serpentine stitch, blanket stitch, and straight stitch with great results.

When you get to a corner, you stitch right up to the edge. Then you lift the foot and pull the quilt straight back about 10-12 inches (away from you) and put the foot back down on top of the binding and finger press the folded binding hanging out the back of the machine. Don't skimp on how much you pull through the back or you won't have enough to comfortably work with.

Then you fold the mitered corner down in front and secure with pins or tape, then the same for the back.

I now prefer Kimberbell Tape to do this. I do not sew over pins and when using them, as soon as I took them out, it would shift. I can sew right through the tape and it picks out easily without gumming up my needle or fabric.

Then you pull the quilt towards the back and insert into the extra binding that was pulled out. Then you carefully pull the binding backwards through the binder attachment, moving the quilt backwards as you go, until you are at the corner ready to continue stitching.

Gently pull until the binding encases the edge and you are back at the corner

Since I use the Kimberbell tape, I don't have to futz with pins. Just start stitching again. For the record, I wouldn't use any other brand of tape for this even it it does look like paper bandage tape. It's been made for stitching through.

And how do I join the ends of binding? There are a couple of different methods, but I am now a fan of joining the ends at a corner! This means I can use the binder as much as possible. If I joined along a side, I'd have to wing it to secure the binding on either end of the join.

 So I just hand tuck the raw ends to make a nice mitered corner and stitch it down. If I stitch all four corners down at the miters, it would be super duper hard to tell the difference. My friend and one of my favorite customers, Ann, took a look at this quilt and totally approved.

Because the attachment covers the bobbin cover door, you'll want to start with a full bobbin. Learn from my experience! Also, I don't recommend using a super complicated decorative stitch for this reason; uses more thread.

I wouldn't use this for show quilts, but if you want something to help get quilt binding done, this is fabulous. Great for charity quilts, utility quilts, and in my case, shop samples. I know some will say they prefer to hand bind, that's it's relaxing. I actually agree, but I am strapped for time and this helps.

My daughter is certainly happy to finally have her first quilt done. She pieced these 10" squares together and then we split the quilting. We each quilted every other block, and then it sat....waiting for its binding. Now it's all done!

Now, it's not cheap. But time is priceless. Many dealers don't keep the binders in stock because of the price, but I do, now that I've seen how easy it is to use. You can find the Janome Quilt Binder Set over at AmyQuilts.com in two versions for different machines.

Finally, yes, I'm back to blogging here. Turns out our online shop's blogging platform makes it difficult to format a decent article and more importantly, it didn't allow me to respond directly to comments! That's a total deal breaker, so this will become the blog for all of my sewing and quilting adventures.

Quilting Doesn't Happen without a Top

I've finished up another block of the Splendid Sampler 2 this week.

Working on these blocks and sharing them with you may seem outside of my usual work, but ultimately my aim is to encourage you to quilt your own quilts and that can't happen in a vacuum that doesn't consider the blocks and piecing that is being quilted.

Read the rest of this post at my new blog over on the AmyQuilts.com site. Don't forget, this blog will be retired soon and left as an archive. Change your links so you don't miss a thing.   I am happy to announce that after a painful attempt to change my blogging platform, blogging will continue to happen right here.

Splendid Sampler 2 Block 1

Today is the launch of the new The Splendid Sampler™ Quilt Along! We begin with 20 Free blocks and then the book comes out and continue making blocks with it. Pat Sloan and Jane Davidson authored this series of books with help from numerous quilt designers and I am delighted to be one of them for the Splendid Sampler II.

Pat and I first crossed paths when she interviewed me for her American Patchwork and Quilting Podcast. You can listen to the episode by clicking through the above link. We later met in person earlier this year where we were both teaching at Quilt Weekend Maysville. She is a hoot and has such a heart for quilters.

The first block was contributed by Alex Veronelli, spokesperson for Aurifil Thread, so you know there's going to be a giveaway involved. Get the download by visiting the Splendid Sampler site as well as other fabulous links and instructions.

Check out his block and the Splendid Sampler Facebook Group! There's all kinds of inspiration there as well as a bit of guidance for fabric selection and how to manage a Quilt Along that releases weekly and continues for nearly a full year!

My version of Alex's block is below....

Alex's block is simple but constructed a little differently than expected so to give you these great angles without fancy rulers. It's a bit like a french braid quilt. These six inch blocks of the SS2 is a bit of a challenge for me as I like to do bigger blocks or wholecloth projects so I can get to the quilting, but it's good exercise for my piecing skills.

I pulled my fat quarters several times for this project! I wanted scrappy, but coordinated. I didn't want anything too matchy-matchy though! Then I kept adding to the project box.

The designers were encouraged to stylize the block background which was a little new for me as I'm prone to just snap a plain pic of a block on a table or design wall. I had to throw in this great charm I found.

I hope you will follow along with me as I work through these blocks. Of course, once I get the top done, I'll share my quilting plan with you. By then, I'm sure I will have switched over to our new website and blog. I have started with a redesign of my current site which you can find at AmyQuilts.com. You'll notice two blogs there as I have listed one short post on the blog already which will eventually replace this one.

How about you? Will you join in the Quilt Along? Have you done the first one? Maybe started once upon a time, but never completed it? Let me know in the comments.

Amy's Quilting Juggling Act

Hard on the heels of teaching at the Janome Education Summit, I've been dabbling in quite a few quilty projects, though only a few or them involved quilting with rulers or ruler work. Click on the above link to read about the summit and links from other fabulous participants.

Janome passed along some photos from the event, so I thought I'd share them with you too. The Summit was my biggest class yet in teaching free motion quilting with rulers. Thank goodness we all had the same machine (Janome 9400), ruler foot and the Janome Ruler Work Kit for our rulers.  That made it a lot easier even though some of our participants hadn't done free motion quilting before.

Here's a great shot of Sarah Ann Smith! It was an honor to have her in class as she's been an inspiration over the years. She totally did her own thing with the project and gave a fabulous write up on the quilting with rulers class segment on her blog.

Have you seen the Jelly Roll Rug yet? Just had to make one of these fun things. I used a jelly roll and two rolls of pre-cut batting strips, but it's an excellent project for using up scraps of batting.

The trick to getting a nice flat rug instead of a ruffled thing my husband said looked like a swimming flounder is to make sure to sew on a large flat surface (pattern gives a suggestion how to set up machine next to a table if you don't have a machine cabinet) and to ease the fabric around the curves. I loved using my Horn cabinet for this.

As soon as I returned from the Summit, I had to get cracking on my shop's Row by Row pattern and project. Row by Row (aka rxr) is like a giant shop hop, all across North America (possibly elsewhere? Unsure) where travelling quilters collect either free patterns or buy the kit from shops. If you are the first to show a finished "row" quilt with 8 patterns from row shops, to a participating shop, you will win a bunch of fabric. It's something really fun to add during your summer travels.

My "row" is actually an 18 inch block as they are allowing different pattern sizes this year. I played with my machine's decorative stitches and a couple of different weights of Aurifil thread on it. I'll write up more about Row by Row closer to the launch date of June 21st. 

I'm really excited about this fabric line by Hope Yoder that we've got in the shop, especially the panel. I decided to order two more bolts of the panel in the thoughts that this might be the basis of my first either Quilt-along, or a new online class. I've got kits for this quilt featuring the panel in the shop right now, but I'll let you know more about what I want to do with it soon. Need to get the additional panels in before I launch something online.

Speaking of hosting a Quilt-along or a new online class, I'm working on two big changes for you  and my business/teaching.

Ever since we bought our bricks and mortar shop, Sew Simple of Lynchburg, I've been neglecting this blog and my video making. I've been scattered in several places online too and it's been quite a juggling act. To make up for my lack of blogging and video making, I've been shooting more live Facebook videos and they certainly helped me feel more connected to you in my online audience, but I've really been spread thin. Live videos are fun and easy to do, but lacking when it comes to organized instruction.

I finally reached out to a pair of mentors of mine and asked them what to do with my websites. I was afraid to hear how bad my sites were as I'm the one who set them all up, so they're a bit amateurish, though fit for my tiny budget. Their advice? It was that I need to condense the various sites into one site if possible and shorten the url. If you've ever heard me struggle in a video to say "I'm Amy from Amy's Free Motion Quilting Adventures," you know they're right!

So....I'll be transitioning everything over to AmyQuilts.com!

I'm excited about the change though it will take a lot of work and a bit of time to get everything moved. If you follow the blog via a feed reader like Bloglovin' or something else, I'll let you know when the blog makes the switch and you'll want to change your settings to the new blog. This blog will stay online, but I won't be adding to it once I make the switch.

Lastly, I'm looking at doing some of my own online classes! These will fit somewhere between the highly scripted classes I did with Craftsy and my very casual, informal Facebook live videos, or even my YouTube videos. This will give me better control over the content I teach and how I teach it. Some classes will be free, others will be paid. All will be full of great information and taught in my laid-back style.

I'm very excited about these changes and I hope you will be too! Let me know your thought in the comments.